Xem thông tin chi tiết về tài liệu
Tên tài liệu/ đề tài, dự án: Hydrocracking of residual oil using molybdenum supported over mesoporous alumina as a catalyst
Tác giả/ chủ nhiệm: Phaik Yee Looi, Abdul Rahman Mohamed, Ching Thian Tye
Năm xuất bản: 2012
Thời gian đăng: 18/12/2015
Danh mục: Tập 182
File đính kèm:
Thông tin mô tả:
A series of mesoporous alumina catalysts with different textural properties were prepared via the sol–gel method, and the aluminium precursor, chain length of the surfactant and calcination temperatures were varied. The influence of various preparation parameters on the resulted alumina surface area, pore size, pore volume and acidity were investigated. Mesoporous alumina with large surface area of 270–380 m2/g and pore size ranging from 3 to 19 nm were successfully synthesised. The activity of mesoporous alumina supported molybdenum catalysts with different properties in hydrocracking of residual oil was determined at 400 ◦C. The acidity of the catalyst enhanced the conversion and the production of light gas oil. Higher conversion and higher of liquid products yield were achieved by using catalyst with larger mesopore size as compared to catalyst with smaller pore size and similar acidity.
Từ khóa tìm kiếm: Mesoporous alumina,Molybdenum catalyst,Residual oil hydrocracking,Pore size