BACK TO TOP
Trang chủ
-
Understanding of mass transfer resistance for the adsorption of solute onto porous material from the modified mass transfer factor models
-
Preparation of polyaniline–polypyrrole binary composite nanotube using halloysite as hard-template and its characterization
-
Enhanced photocatalytic activities of BiOI/ZnSn(OH)6 composites towards the degradation of phenol and photocatalytic H2 production
-
Assessment of biological activity in contact flocculation filtration used as a pretreatment in seawater desalination
-
Direct methane fueled solid oxide fuel cell model with detailed reforming reactions
-
CFD analysis of liquid phase flow in a rotating packed bed reactor
-
Modeling of fixed-bed adsorption of fluoride on bone char using a hybrid neural network approach
-
Degradation kinetics and mechanism of emerging contaminants in water by dielectric barrier discharge non-thermal plasma: The case of 17b-Estradiol
-
Ozone-assisted UV254 nmphotodegradation of gaseous ethylbenzene and chlorobenzene: Effects of process parameters, degradation pathways, and kinetic analysis
-
Hexavalent chromium detoxification by nonlivingChlorella vulgaris cultivated under tuned conditions
-
Anaerobic membrane bioreactor modeling in the presence of Soluble Microbial Products (SMP) – the Anaerobic Model AM2b
-
Detachment characteristics of a mixed culture biofilm using particle size analysis
-
Au/3DOM LaCoO3: High-performance catalysts for the oxidation of carbon monoxide and toluene
-
High-permeability pluronic-based TiO2hybrid photocatalytic membrane with hierarchical porosity: Fabrication, characterizations and performances
-
Application of hollow mesoporous carbon nanospheres as an high effective adsorbent for the fast removal of acid dyes from aqueous solutions
-
Synthesis of TiO2 hollow sphere multimer photocatalyst by etching titanium plate and its application to the photocatalytic decomposition of gaseous styrene
-
Removal of hydrogen sulfide using carbonated steel slag
-
Fabrication of cerium-doped lead dioxide anode with improved electrocatalytic activity and its application for removal of Rhodamine B
-
Improvement of aqueous mercury adsorption on activated coke by thiol-functionalization
-
Removal of residual anti-inflammatory and analgesic pharmaceuticals from aqueous systems by electrochemical advanced oxidation processes. A review
-
Sanitary landfill leachate treatment using combined solar photo-Fenton and biological oxidation processes at pre-industrial scale
-
Efficient visible-light induced photocatalysis on nanoporous nitrogen-doped titanium dioxide catalysts
-
Energy efficiency in hydrogen sulfide removal by non-thermal plasma photolysis technique at atmospheric pressure
-
Improved wet peroxide oxidation strategies for the treatment of chlorophenols
-
Systematic effects of S-doping on the activity of V2O5/TiO2 catalyst for low-temperature NH3-SCR
-
Facile synthesis of Cu nanoparticles by utilizing ethanolammonium sulfate for facilitated gas transport
-
A novel vortex mixer actuated by one-shot electricity-free pumps
-
An experimental study of liquid mixing in a multi-orifice-impinging transverse jet mixer using PLIF
-
Hollow mesoporous frameworks without the annealing process for high-performance lithium–ion batteries: A case for anatase TiO2
-
Performance comparison of Pt–Au/C and Pt–Bi/C anode catalysts in batch and continuous direct glucose alkaline fuel cell
-
Investigation of ethylene production in naphtha thermal cracking plant in presence of steam and carbon dioxide
-
Simulation of coalescence, break-up and mass transfer in a gas–liquid stirred tank with CQMOM
-
The newest achievements in synthesis, immobilization and practical applications of antibacterial nanoparticles
-
Degradation of sulfamethoxazole by persulfate assisted micrometric Fe 0 in aqueous solution
-
Biomass gasification in supercritical and subcritical water: The effect of the reactor material
-
Thermally activated persulfate (TAP) oxidation of antiepileptic drug carbamazepine in water
-
Removal of arsenic from groundwater by adsorption onto an acidified laterite by-product
-
Performance and mechanism of Mg/Fe layered double hydroxides for fluoride and arsenate removal from aqueous solution
-
Biodiesel production in a counter-current reactive extraction column: Modelling, parametric identification and optimisation
-
Analysis of photocatalytic performance of nanostructured pyrogenic titanium dioxide powders in view of their polydispersity and phase transition: Critical anatase particle size as a factor for suppression of charge recombination
-
Equilibrium modeling of As(III,V) sorption in the absence/presence of some groundwater occurring ions by iron(III)–cerium(IV) oxide nanoparticle agglomerates: A mechanistic approach of surface interaction
-
Enhanced phosphate removal from aqueous solution by ferric-modified laterites: Equilibrium, kinetics and thermodynamic studies
-
Three-dimensional electrochemical process for wastewater treatment: A general review
-
LES–DEM investigation of an internally circulating fluidized bed: Effects of gas and solid properties
-
Simultaneous co-adsorptive removal of phenol and cyanide from binary solution using granular activated carbon
-
Extraction characteristics of heavy metals from marine sediments
-
Preparation, characterization and application of lignin-based activated carbon from black liquor lignin by steam activation
-
A novel photofunctional g-C3N4/Ag3PO4 bulk heterojunction for decolorization of Rh.B
-
Efficient removal of Congo red from aqueous solutions by adsorption onto interconnected polypyrrole–polyaniline nanofibres
-
A model on the CaO multicyclic conversion in the Ca-looping process
-
Ultrathin conformal coating of apatite nanostructures onto electrospun nylon 6 nanofibers: Mimicking the extracellular matrix
-
A new strategy for producing antibacterial textile surfaces using silver nanoparticles
-
Researching the fabrication of anticorrosion superhydrophobic surface on magnesium alloy and its mechanical stability and durability
-
Adsorption of tetracycline and chloramphenicol in aqueous solutions by bamboo charcoal: A batch and fixed-bed column study
-
Dye adsorption by resins: Effect of ionic strength on hydrophobic and electrostatic interactions
-
Enhancing the performance of CaO/CuO based composite for CO2capture in a combined Ca–Cu chemical looping process
-
Design of distributed wastewater treatment systems with multiple contaminants
-
Biofouling control of halloysite nanotubes-decorated polyethersulfone ultrafiltration membrane modified with chitosan-silver nanoparticles
-
Numerical study of microbial population dynamics in anaerobic digestion through the Anaerobic Digestion Model No. 1 (ADM1)
-
Using water activity measurements to evaluate rheological consistency and structure strength of sludge
-
Design a novel optical adsorbent for simultaneous ultra-trace cerium(III) detection, sorption and recovery
-
Adsorbent tannin foams: New and complementary applications in wastewater treatment
-
Highly improved visible light photocatalytic activity of BiPO4 through fabricating a novel p–n heterojunction BiOI/BiPO4 nanocomposite
-
High performance purification process of methyl and ethyl esters produced by transesterification
-
Fe(bpy) 2+ 3 supported on amidoximated PAN fiber as effective catalyst for the photodegradation of organic dye under visible light irradiation
-
The influence of pore generating agent on the efficiency of copper and iron ions removal from liquid phase by polyethersulfone membranes
-
Nitrobenzene degradation in Fenton-like systems using Cu(II) as catalyst. Comparison between Cu(II)- and Fe(III)-based systems
-
Synthesis of crystalline mesoporous-assembled ZrO2nanoparticles via a facile surfactant-aided sol–gel process and their photocatalytic dye degradation activity
-
Silver and copper co-impregnated onto TiO2-P25 nanoparticles and its photocatalytic activity
-
Synthesis of glycerol carbonate from glycerol and dimethyl carbonate over the extruded CaO-based catalyst
-
Spherical Rh17S15@C and Rh@C core–shell nanocomposites: Synthesis, growth mechanism and methanol tolerance in oxygen reduction reaction
-
Acetalization reaction between glycerol and n-butyraldehyde using an acidic ion exchange resin. Kinetic modelling
-
Metal oxides nanoparticles from complexes on SBA-15 for glycerol conversion
-
Selective removal of mercury ions using a chitosan–poly(vinyl alcohol) hydrogel adsorbent with three-dimensional network structure
-
Improved adsorptive mineralization capacity of Fe–Ni sandwiched montmorillonite nanocomposites towards magenta dye
-
Adsorption dynamics of toluene in structured fixed bed with ZSM-5 membrane/PSSF composites
-
Modeling of lead (II) biosorption by residue of allspice in a fixed-bed column
-
Nitric acid decomposition kinetics in mixed acid and their use in the modeling of aromatic nitration
-
Removal of F- from aqueous solution using Zr(IV) impregnated dithiocarbamate modified chitosan beads
-
Preparation of cellulose fiber–TiO2 nanobelt–silver nanoparticle hierarchically structured hybrid paper and its photocatalytic and antibacterial properties
-
Microalgae growth on the aqueous phase from Hydrothermal Liquefaction of the same microalgae
-
Enhanced total nitrogen removal performance in a modified Orbal oxidation ditch system with internal nitrate recycle
-
Production of renewable diesel by hydrotreatment of soybean oil: Effect of reaction parameters
-
Enhanced thermal and mechanical properties of functionalized graphene/thiol-ene systems by photopolymerization technology
-
Adsorption of the herbicide S-Metolachlor on periodic mesoporous organosilicas